Articles on: Smart Trac

Remove Smart Trac sensor from the asset

Removing the sensor from the equipment

If you need to remove the previously installed Smart Trac sensor from your machine, please follow the instructions below.

Loosen the lock nut of the sensor using an open-end wrench (10mm for M6 base or 13mm for M8 base) by turning it counterclockwise.

Unscrew the sensor completely. If you also want to remove the adhesive base, proceed to the next step.

Remove it by positioning the chisel on the side of the base, using a sledgehammer.

Updated on: 11/17/2023

Was this article helpful?

Share your feedback


Thank you!