Attachment
Smart Trac Installation: Positioning
The most important step for the correct installation of the sensors is to choose the appropriate position and attachment locations, as this directly influences the assertiveness of the Insights. To learn more about how to adequately fix the Smart Trac device, check this article. Positioning To position your sensor properly,Some readersConnecting the Smart Receiver to Mobile Network or Wi-Fi
The Smart Receiver requires an external power supply. Before determining its placement, make sure there are electrical connections near the installation site. To learn more about the installation of Smart Trac sensors, please refer to the positioning and fixing articles.Few readersDisconnecting the Receiver from the Mobile Network or Wi-Fi
If you wish to disconnect the receiver from the previously connected mobile network or Wi-Fi and then connect it to the available mobile network in the region or another Wi-Fi network, please follow the instructions below. First, unplug your Smart Receiver from the power outlet, wait a few seconds, and plug it back in. Wait for the LED to display a white light, which will take about 10 seconds. (https://storage.crisp.chat/Few readersSmart Trac Installation: Attachment
The most important step for the correct installation of the sensors is choosing the appropriate position and Attachment locations, as it directly affects the accuracy of the insights. To learn how to properly position Smart Trac, click here. Attachment There are two correct and secure ways to attach Smart Trac to the asFew readersRemove Smart Trac sensor from the asset
If you need to remove the previously installed Smart Trac sensor from your machine, please follow the instructions below. Loosen the lock nut of the sensor using an open-end wrench (10mm for M6 base or 13mm for M8 base) by turning it counterclockwise. Unscrew the sensor completely. If you also want to remove the adhesive base, proceed toFew readers